Plug and play installation in an open PCIe slot no extra power cables needed. Add capacity for critical projects, files and games. Reuse an Apple factory SSD or OWC PCIe Aura SSD in your Mac Pro (2010 - 2012). Distribute This Page: Bookmark & Share Download: PDF Manual The MacBook Pro 'Core i5' 2.5 13-Inch (Mid-2012/USB 3.0) features a 22 nm 'Ivy Bridge' 2.5 GHz Intel Here's whats going on, I have a Zoom TAC-2 Thunderbolt Audio interface which I've been using for sometime with another macbook pro 17" and it had no problems on a macbook air either.PCIe Adapter Card for Apple and OWC Aura SSDs. Identifiers: Mid-2012 13' - MD101LL/A - MacBookPro9,2 - A1278 - 2554 All MacBook Pro 13-Inch Models All 2012 Models Dynamically Compare This Mac to Others. Apple MacBook Pro 13-Inch 'Core i5' 2.5 Mid-2012 Specs.At this stage I was thinking okay this has to be either the thunderbolt cable or the Interface has died on me somehow. Just today I tried the interface on two different 17-inch macbook pros of mine (one running High Sierra the other is El Capitan and it appears to get no power from either of them. If your computer doesnt recognize your iPhone, iPad, or. Then try a different Apple USB cable. In general, it's best to assume that any 'Type C' ports on any computer are USB 3.1 only unless the Thunderbolt logo appears next to them ( ) or this is stated by the manufacturer.Try each USB port to see if one works.This model was on the market from June 2012 until it was discontinued in October 2016, by which time its base price had dropped to 1,099.Apple has a Thunderbolt to FireWire Adapter for 29, but it has a older Thunderbolt connector that doesn’t plug into the Thunderbolt port on a new MacBook Pro, MacBook Air, or 24-inch iMac. After this, Apple only made 13 models with Retina Displays. This was the last of the 13 MacBook Pro models with a 1280 x 800 pixel display.
I also ran into an an error regarding installing from usb "There was a problem installing “Mac OS X”. It's the firmware that is the issue! I noticed both the 17" models that wouldn't power on my interface had the same firmware as I posted in the screenshot! Firmware Version: d.0, Port Micro Firmware Version: 1.2.1Unfortunately the correct firmware cannot be installed from any of the later versions of OS X (not sure from when, but presuming Yosemite?) so after a late night and a lot of mucking around I managed to get Mountain Lion 10.8.5 installed onto a spare toshiba drive I had, for some reason I couldn't install from an external caddy either so had to mount the drive internally. Anyone have any ideas of what to try or similar experiences not getting power from their thunderbolt ports? Could this be software even?DAN! Okay I found out what the problem is, you're going to want to make a note of this as it will be helpful to others.Firstly, I stumbled across this which provided clues. This made me happy but it still leaves a lot of questions about my 2 macbook pros and their thunderbolt ports.Is it possible they're not providing power through the correct pins? The pins look clean to me so I don't see any obvious issue and the fact it works for target disk mode also seems strange. Windows office 2016 for mac stand aloneI had to return the docks, because even Apple support wasn't able to point me to a solution.Other than in your experience, on my MBP the Thunderbolt Firmware Update v1.0 was installed in MacOS 10.12 Sierra. Only the Belkin Thunderbolt 1 dock worked. This was really a nightmare because I couldn't use a Thunderbolt 2 dock (Akitio and CalDigit). Thunderbolt Adapter Book Pro 2012 Usb Update Has EverSo, better check out your model by clicking on the menu bar Apple logo and choosing “About this Mac…. The latest Mac OS that the 2011 MBPs can run is High Sierra. So it might be possible, that there is even a more recent version.Now I am curious to find out if anybody has a newer version installed on his or her Mac? And what do I probably have to do to get it?Hi leggy, if your MB pro runs Catalina then it is most likely not a 2011 model. No Thunderbolt update has ever reached my Mac, that's why I had to install it manually. As it seems Apple has rolled out later Firmwares inside MacOS updates. In the end, I got the Thunderbolt firmware 22,1 and the Port-Micro Firmware 2.1.3. "MBP-22-01.bin","-payload", $FirmwareDirectory. "ThorUtil.efi","-payload", $FirmwareDirectory. You have to open it with any editor (textedit for example) and here is its content:My $FirmwareDirectory = "/System/Library/CoreServices/Firmware Updates/MacBookProTBUpdate10/" My $debug = (-e "/tmp/com.apple.pkg.testing") #set NVRAM for tbft ( Use Safe Mode for T29 updates (EPROM, Micros) to prevent PCIe unplug during update)System("/usr/sbin/nvram tbt-options=%04") My $retVal = system("/usr/sbin/bless", "-mount", "/","-firmware", $FirmwareDirectory. To go ahead you must first deactivate SIP from the Recovery mode terminal:Then restart and type the following command:Then we copy the MacBookProTBUpdate10 directory which contains all necessary information for the installation of the Firmware on the System.Sudo cp -a System/Library/CoreServices/"Firmware Updates"/MacBookProTBUpdate10 /System/Library/CoreServices/”Firmware Updates”Then you have to enter the command that allows the firmware to be updated.The flashTBFirmware script which is in the Scripts / postinstall_actions directory gives us all we need. All you have to do is copy the MacBookProTBUpdate10 directory from ~/Desktop/Firm_Thunderbolt/ThunderboltFirmwareUpdate.pkg/System/Library/CoreServices/Firmware Updates into the native system structure of the Mac : /System/Library/CoreServices/Firmware UpdatesThere is however a little problem with Catalina, as the system is mounted in read only. /System/Library/CoreServices/Firmware Updates/MacBookProTBUpdate10/ThorUtil.efiAnd now here is the new directory 1 jean staff 87688 1 jean staff 500 PackageInfoA System directory with the correct tree structure has been created by the tar command with the correct firmware.
0 Comments
Leave a Reply. |
AuthorTommy ArchivesCategories |